Lippert Power Tongue Jack⁚ Key Features and Specifications
The Lippert Power Tongue Jack boasts a 3,500 lb. lift capacity and an 18″ vertical travel range. It features helical cut gears for quiet operation and LED lights for nighttime visibility. A 30 amp fuse protects the system. Installation is straightforward; see manual for details.
Lift Capacity and Travel
The Lippert Power Tongue Jack is designed to handle significant weight, boasting a substantial 3,500 lb; lift capacity. This makes it suitable for a wide range of trailers, from travel trailers and cargo trailers to fifth-wheel RVs. The jack’s impressive lifting power ensures reliable support for even the heaviest loads, providing peace of mind during setup and takedown. Complementing its impressive lift capacity is its generous 18-inch vertical travel range. This extensive travel allows for easy adjustment and accommodates varying ground levels and trailer heights. The combination of high lift capacity and ample travel makes the Lippert Power Tongue Jack a versatile and practical solution for various towing needs, simplifying the often strenuous task of leveling and securing your trailer.
Power Requirements and Fuse Information
The Lippert Power Tongue Jack operates on a 30-amp power supply. Ensuring your vehicle’s electrical system can handle this amperage is crucial before installation. Improper power supply can lead to malfunction or damage. The jack is equipped with a 30A ATO-type in-line fuse as a safety feature to protect against overcurrent situations. This fuse is essential for preventing damage to the jack’s motor and wiring. In the event of a blown fuse, it’s vital to replace it with a fuse of the same rating. Using a higher-rated fuse could damage the jack; Always check the fuse before troubleshooting any operational problems. Remember to consult your vehicle’s electrical system specifications to ensure compatibility and safe operation of the Lippert Power Tongue Jack.
Installation Process⁚ A Step-by-Step Guide
Begin by supporting your trailer according to the manufacturer’s instructions. Carefully slide the jack leg through the coupler hole on the A-frame. Align the mounting plate holes with the coupler plate holes. Secure the Power Tongue Jack to the coupler plate using three 3/8″-16 x 1″ serrated flange grade 5 zinc-coated bolts. Connect the red power wire from the jack housing to your trailer’s wiring harness, ensuring all electrical connections are properly secured and loom is in place to prevent damage. Ground the black wire appropriately. Before connecting to your tow vehicle, test the jack’s functionality to ensure correct operation. Never operate the jack without the footpad retaining pin fully inserted. Consult the detailed diagrams and instructions within the Lippert Power Tongue Jack owner’s manual for visual guidance and precise specifications. Always prioritize safety throughout the installation process.
Lippert Power Tongue Jack⁚ Operation and Maintenance
Operate using the provided switches; extend until the coupler clears the ball. Regularly inspect for damage and lubricate moving parts. Refer to the manual for troubleshooting and manual override instructions. Proper maintenance ensures longevity and safe operation.
Manual Override Instructions
The Lippert Power Tongue Jack incorporates a manual override system for situations where electrical power is unavailable or the jack malfunctions. Before initiating a manual override, always ensure the trailer is properly supported using appropriate safety measures like wheel chocks. Locate the manual override port, typically concealed by a rubber plug on the jack’s gearbox. Carefully remove the plug to expose the manual drive shaft. Insert the provided manual crank handle (if included; otherwise, a compatible socket wrench might be needed) into the drive shaft. To raise the trailer, turn the crank handle clockwise. To lower, turn counter-clockwise. Proceed slowly and deliberately, paying close attention to the jack’s movement and the trailer’s stability. Never attempt to force the jack; if resistance is encountered, stop and investigate the cause of the obstruction. Once the desired height is achieved, secure the jack in position. Replace the rubber plug to protect the drive shaft from the elements. Remember to consult the complete owner’s manual for detailed diagrams and specific instructions tailored to your Lippert Power Tongue Jack model.
Troubleshooting Common Issues
If your Lippert Power Tongue Jack fails to operate, first check the power supply. Ensure the battery is adequately charged and the connections are secure. Inspect the 30-amp fuse; replace it if blown. If the jack makes unusual noises or operates erratically, this could indicate a mechanical problem. Check for obstructions hindering the jack’s movement. If the jack is unresponsive to the switch, verify that the switch itself is functioning correctly. Consider testing the switch’s continuity using a multimeter. If the problem persists, attempt the manual override procedure. If the manual override also fails, there may be an internal mechanical issue requiring professional service. Before attempting any repairs, always disconnect the power source to prevent injury. Refer to the detailed troubleshooting section in your Lippert Power Tongue Jack owner’s manual for more specific guidance on diagnosing and resolving common problems. Remember, safety is paramount; if unsure about any repair, consult a qualified technician.
Regular Maintenance Tips for Extended Lifespan
To ensure your Lippert Power Tongue Jack provides years of reliable service, a regular maintenance schedule is crucial. Begin by visually inspecting the jack for any signs of damage or wear, paying close attention to the motor housing, the jack’s mechanical components, and the electrical wiring. Check the connections for any corrosion or looseness, and clean them as needed. Lubricate the moving parts with a suitable lubricant, following the manufacturer’s recommendations. This will reduce friction and prevent premature wear. Periodically check the 30-amp fuse and replace it if necessary. After each use, gently retract the jack fully to prevent strain on the mechanism. Avoid overloading the jack beyond its 3,500-pound capacity. Store your RV in a clean, dry environment to protect the jack from the elements. For more detailed maintenance procedures and recommendations, consult your Lippert Power Tongue Jack owner’s manual. Regular maintenance significantly extends the lifespan of your jack and ensures its smooth and safe operation.
Lippert Power Tongue Jack⁚ Resources and Support
For manuals, parts, and troubleshooting assistance, visit Lippert’s website (lippert.com) or call their customer support at 432-LIPPERT (432-547-7378). etrailer.com also offers Lippert products and support.
Accessing the Official Owners Manual
Obtaining the official Lippert Power Tongue Jack owner’s manual is crucial for safe and proper operation. Several avenues exist to access this vital resource. First, check Lippert Components’ official website, lippert.com. Their website usually houses a comprehensive library of manuals for their products, searchable by model number (like 285318). If you’re unable to locate it online, consider contacting Lippert’s customer support directly via phone at 432-LIPPERT (432-547-7378) or through their online contact form, if available on their website. They can assist you in obtaining a digital copy or direct you to a retailer who can provide a printed version. Another helpful resource might be the manualslib.com website, where users often upload manuals for various products. Remember to always verify the authenticity and accuracy of any downloaded manual to ensure it matches your specific Lippert Power Tongue Jack model.
Finding Replacement Parts and Accessories
Locating replacement parts and accessories for your Lippert Power Tongue Jack is simplified through several avenues. Lippert Components’ official website, lippert.com, is your primary resource. Their online store or parts catalog should list available components, including the manual crank handle (part number may vary), bolts (like the 3/8″-16 x 1″ serrated flange grade 5 zinc-coated bolts), and the footpad kit. If you can’t find what you need online, contacting Lippert’s customer support directly (432-LIPPERT or their website’s contact form) is recommended. They can guide you toward authorized dealers or distributors who stock Lippert parts. Online retailers like etrailer.com also often carry Lippert products and replacement parts. When ordering, always double-check the part number to ensure compatibility with your specific Lippert Power Tongue Jack model. Remember to keep your owner’s manual handy; it may contain diagrams or part lists to aid in identification. For discontinued parts, contacting Lippert directly is crucial as they may have access to archived inventory or alternative solutions.
Contacting Lippert Customer Support
Lippert Components offers multiple avenues for contacting their customer support regarding your Power Tongue Jack. Their main phone number, readily available online, is 432-LIPPERT (432-547-7378). This number connects you to their general support line, where you can inquire about troubleshooting, replacement parts, warranty information, or any other concerns. Additionally, Lippert maintains a comprehensive website (lippert.com) featuring a dedicated customer support section. This section usually includes a contact form, allowing you to submit detailed inquiries with attached documents like photos or order numbers. Expect a response time that varies depending on the complexity of your issue and their current workload. Before contacting support, gather relevant information, including your Power Tongue Jack’s model number, date of purchase (if applicable), and a concise description of the problem. This will expedite the resolution process. For urgent matters, a phone call is usually the quickest approach; for less urgent issues, the online contact form offers a convenient alternative. Remember that providing clear and detailed information enhances the efficiency of customer support’s response.